How to Replace a Kia Sportage Replacement Key
The key of a lot of Kia models has an electronic keyless entry system built into. The key can be compared to an electronic remote and can be replaced with a brand new one from a Kia dealer or a locksmith.
Key fobs can stop working due to a number of reasons, such as an inactive battery, worn out buttons signals, signal interference or water damage. Here are some helpful tips to assist you in getting your Kia sportage replacement key working once more.
How do you replace the remote key or smartkey?
The battery in your Kia's intelligent key will eventually need to be replaced, whether it's a remote that starts with a push button or a regular metal key that doesn't contain a transponder. This is especially when the car displays a message telling that the remote or smart key has low battery power.
Luckily, it's a relatively simple process. In order to replace the battery of the key fob take the mechanical key from the slit at the back of the key fob. Then pry open the cover. kia ceed key fob replacement is located inside the key fob that holds the battery in the correct position. By using a small screwdriver loosen the screw and pull out the old battery. Then, you can insert the new battery and close the slit on the key fob.
Once the key fob has an updated battery and you've tested it, press the locks and unlock buttons. You're in good shape in case the doors lock and unlock as expected. You can now use the hands-free lock/unlock feature on your Kia when your fingers start to get cold or you have to go on errands around Brandon.
Note: Certain key fobs (transponder chip or smart keys) may need to have their programming completed. This requires a special programming machine that only the dealer or locksmith can access. Other keys (non-transponder metal keys) do not require programming. If you're required to reprogramme your key, you'll have to note the key code's number on the key code tag.
How do you replace the battery?
If your Kia key fob is not responding when you press the lock or unlock button on the fob, this is a clear indication that the battery needs to be replaced. A low battery may also cause other problems like the check engine light flashing on or a delay in cranking the engine. It is relatively easy to replace key fob batteries with only two tools.
Before you begin ensure that your vehicle is off and all doors are closed. Find the small metal or plastic piece at the bottom of the key fob. Then, jiggle it until the key is released. You can then insert this key into the door handle of the driver to open your car.
To replace the battery on the key fob remove the cover that covers the rear. Make use of a plastic pry tool to remove the latch that holds the black negative cable. Take the old battery out, and then orient the replacement battery to ensure that its "+" side is facing you, and the "-" negative side is facing the fob's electrical contacts. Push the new CR2032 battery straight into position without putting too much force on it to avoid bending or damaging the contacts of the metal.
After the new battery has been installed and the key fob is turned on, turn it off and then turn it on in the ignition for a few times until the door locks cycle. Then, you can test your Kia key fob to see if it is working properly again.
How can you replace the smart key?
Depending on the model of your Kia Sportage, you may have an ordinary key fob or a smart key. The difference between these is that the smart key has the small blade of a key hidden within it, whereas the standard fob does not. Both kinds of key fobs contain batteries inside that will eventually have to be replaced. This is an easy process which takes just two minutes.
Make sure to shut off your Kia and sit on a flat or well-lit surface prior to when you begin. Keep in mind that the fob has small parts that can be thrown off should you not be careful.
The first step is to locate the small release button that is located on the lower backside of your fob. This will be either a circular button or a rectangular slot. You can open the key fob by pressing the button.
Once you have the key fob opened and you are able to take off the old battery and replace it. The new battery is CR-2032, and can be purchased on the internet or at your local auto parts shop. When you are done with the battery, you should be able to lock and unlock your car with your key fob, even if your engine isn't running!
How do I replace a mechanical key
The Kia keyfob is an excellent convenience that allows us to lock or unlock our car by pressing one button. But, as with all devices there are issues with it at times. There are ways to resolve these issues and keep your key fobs running for a long time.
A low or dead battery is one of the most frequent problems. The fob could be able to stop working altogether or even to stop working intermittently. If this is the case, replace the battery with a new one.
If this does not resolve the issue, try using a flathead screwdriver standard to wedge the plastic casing of the fob open. Be careful not to damage any internal components or scratch the plastic. Once open, carefully remove the battery you have been using and replace it with a brand new one.
Once the new battery is in, shut and open the doors with the mechanical key (every kia fob has an emergency mechanical key that will fit in the slot). Test the fob to make sure it's functioning properly. If the key fob not working, contact an expert locksmith or dealer to solve the issue. Make sure they cut you an emergency key that functions for all door and trunk cylinders to avoid lockouts in the future.
